|
EP46HT-1AO: Glass Transition Temperature Over 215°C
With exceptional thermal conductivity and electrical insulation properties, EP46HT-1AO is a two component epoxy for high performance bonding and sealing applications. This high temperature resistant system cures readily with heat and offers a long open time at room temperatures. It provides noteworthy dimensional stability, chemical resistance and physical strength properties.
|
|
For more information,
request a technical data sheet on EP46HT-1AO |
|
|
EP3HT: Rapid Curing High Strength Epoxy
Offering high temperature resistance up to 400°F, EP3HT is a one component adhesive/sealant that withstands thermal cycling and many harsh chemicals. This system cures quickly at elevated temperatures. After curing, it readily obtains a tensile lap shear strength in excess of 2,200 psi and delivers first rate dimensional stability.
|
|
For more information, request a technical data sheet on EP3HT |
|
|
MasterSil 800: Silicone System Is Serviceable Up To 300°C
Featuring unsurpassed thermal stability, MasterSil 800 is ideal for bonding, sealing, protective coatings, encapsulating and creating formed-in-place gaskets. This one part, high performance, non-corrosive silicone is low in viscosity making it free flowing and self leveling.
|
|
For more information, request a technical data sheet on MasterSil 800 |
|
|
EP51M: Sets Up In Just 3 minutes At Room Temperature
Master Bond EP51M epoxy system is fast curing making it ideal for production line assemblies and high speed bonding operations. It produces durable and strong bonds that are resistant to thermal cycling and a variety of chemicals. Serviceable from 4K to 250°F, EP51M bonds well to dissimilar substrates. With a convenient one to one mix ratio, it is also easy to use.
|
|
For more information, request a technical data sheet on EP51M |
|
|
UV18Med: Meets USP Class VI Specifications
Medical grade UV18Med is a special UV system for bonding, coating and sealing featuring superb chemical resistance, excellent physical strength properties and toughness. It cures readily in 20-30 seconds when exposed to a UV light. It is ideal for high production applications where fast fixture times and rapid curing are critical.
|
|
For more information, request a technical data sheet on UV18Med |
|
|
EP19HT: One Part Epoxy For Impregnation applications
Featuring superior flow properties, Master Bond EP19HT is ideal for high performance impregnation as well as sealing and coating applications with an exceptionally low viscosity of 300-700 cps. With a remarkable strength profile, it adheres well to a variety of substrates such as ceramics, metals, composites, glass and many plastics. This compound is also serviceable over the wide temperature range of -60°F to +400°F.
|
|
For more information, request a technical data sheet on EP19HT |
|
Copyright © 2014 by Master Bond Inc. All Rights Reserved. This content may not be reproduced in any way without the prior written permission of Master Bond Inc.
|
|